New build 383 stroker for $5500.00 taxes in, as pictured, located in Creston.
Includes:
Clean Block
Groove lifter bores
Bore with torque plate
Eagle Rotating Assembly, Speed Pro, .030, shallow dish
Balanced Assembly
Gasket set
Oil Pump
Cam Bearings
Expansion Plug Kit
Camshaft and lifters, .050" Dur-204/214; Cam Lift-.280/.295; Lobe Center -107/117; Valve lift with 1.5 rockers .420/.443
Heads 8982441 Performance build, 152 cfm runners, 76cc chambers
Head bolts
Push rods
Rocker arms
Springs, retainers, keepers, Z281.94, 1.6 high flow valves
Built by www.cull,ca
$5,500.00 fob Creston
Re HP: the engine is not complete, and has never run, so I expect the HP to be over 300hp, but not 500hp
I would say this would be a great engine for a truck or regularly driven car. If increased performance is desired, it would probably respond well to 1.6 rockers (.448/.472) or/and a little more cam.
www.cull.ca
Includes:
Clean Block
Groove lifter bores
Bore with torque plate
Eagle Rotating Assembly, Speed Pro, .030, shallow dish
Balanced Assembly
Gasket set
Oil Pump
Cam Bearings
Expansion Plug Kit
Camshaft and lifters, .050" Dur-204/214; Cam Lift-.280/.295; Lobe Center -107/117; Valve lift with 1.5 rockers .420/.443
Heads 8982441 Performance build, 152 cfm runners, 76cc chambers
Head bolts
Push rods
Rocker arms
Springs, retainers, keepers, Z281.94, 1.6 high flow valves
Built by www.cull,ca
$5,500.00 fob Creston
Re HP: the engine is not complete, and has never run, so I expect the HP to be over 300hp, but not 500hp
I would say this would be a great engine for a truck or regularly driven car. If increased performance is desired, it would probably respond well to 1.6 rockers (.448/.472) or/and a little more cam.
www.cull.ca
